Skip to main content

Guide: Two easy ways to root Moto G XT1033 XT1032 (Lollipop)

If you’ve been searching for how to root Moto G using latest Lollipop, you’re the luckiest Moto G user as your search stops here. In this tutorial, I will be guiding you to perform all major operations on your Moto G.

Through this guide, I will be explaining the following to perform on your Moto G. This tutorial is applicable for both single SIM and Dual SIM variants.
So let’s begin with the process. To root moto g you must follow them in respective order. Before that, I recommend you to check the pre-requisites section and disclaimer part.

Requirements

  • Make sure that you have the device Moto G XT1033/XT1032.
  • Install necessary fastboot and USB debugging drivers on your Windows PC. In case if you don’t have those, download ADB drivers [link],combined adb and fast boot driver package [here] and Motorola USB drivers [here].
  • For safety Backup all important files including personal contacts, call logs, messages and data in the phone memory.
  • Enable USB debugging under developer options. If the developer option is hidden under settings, go to Setting->About Phone and tap on Build Number many times until developer option is enabled.




Disclaimer

Komputal.blogspot.com will not be held responsible for any damage that may cause to your Moto G device by following this tutorial. However, by rooting Moto G , your warranty is now void. You will no longer receive OTA/official software updates of support. Do it at your own risk.

I'll show you two easy way to root moto g. (Make sure your moto g bootloader is already unlock if not click here to unlock.)

First:

How to Root Moto G on Windows using Superboot (Use this if your android version in 4.4.4 or below)

  • Download and extract Moto G root package [link] to a folder in your desktop.
  • Enter your device into bootloader mode (Turn off the phone then turn on with the ‘volume down’ button pressed) and connect to the computer.
  • Now open the root package folder on your computer and run “superboot-windows.bat” as administrator.
  • Done. You have unlocked Moto G bootloader and rooted so far.

Second:

How to Root Moto G on Windows using RootKit by ChainFire (Use this if your android version in 4.4.4 or above)

Proceed with this step only if everything stated in the above steps has come out correctly.
  • Download and extract Moto G root package [link] to a folder in your desktop
  • Unzip the ' CF-Auto-Root-xxx-xxx-xxx.zip ' file to a separate folder on your computer.
  • Run the " root-windows.bat " file & press the space bar.
  • Wait for a while for the process to finish & your device will reboot.

Voila! you have successfully rooted your device. Check for " Super SU " app in your app drawer.



Proof:


    Labels:

    Comments

    Post a Comment

    Popular posts from this blog

    How to SLIC - BIOS. Vista, Windows 7

    Note: This tutorial is Only for those who have AMI or AWARD Bios, for those who have Phoenix Bios please Google there are a lot of tutorial out there in the forest. To activate a Microsoft Operating System as an OEM (Original Equipment Manufacturing) - SLIC version should match the particular Windows Operating System installed. For Example, Slic v2.0 for Windows Vista, SLIC v2.1 for Windows Vista and Windows 7). - OEM SLP Produc t Key that matches the version of Windows installed Only SLP product key will work, Volume Licensing and Keys Retail Keys will never work. Any SLP product key, the Certificate (Company Cert. e.g Dell, HP, Acer, Lenovo etc. ), and the Slic (Particular Company Slic. e.g Dell, HP, Acer, Lenovo etc.) should always be the same . Downloads Bios Your original Motherboard Bios Tools AMI Tools - Click Here For those who have AMI Bios Award Bios Tools - Click Here For those who have Award Bios Certificate and Slic bin Certificate - Click here Slic ...
    5 comments
    Read more

    How to Unbrick Moto G – Soft Brick Case on android Lollipop

    How to Unbrick Moto G – Soft Brick Case First of all, download the firmware compatible to your device Moto from  this page. Now download and install the RSD lite application [ here ] in your computer. It’s similar to flash tool as in Xperia devices. Once it’s installed, open the firmware package and open the  .XLM file from package using Notepad.  Note to backup the file for precaution. In notepad, search for this line ”  step operation = “getvar ” ”  and delete the line and save the file. Now open the RSD lite software and load the edited (and saved) .XLM firmware. Switch off your phone, boot into bootloader mode and connect to the PC. Now click the Start the button in the RSD software. Once it’s flashed the firmware, disconnect your phone switch on. You’re on the stock version now. Relief!!! Please let me know if you have any problem or other solution you can share.
    Post a Comment
    Read more

    How to make the Best Compressing using WinRAR

    FIRST What were going to do is to set up your options correctly. Open WinRAR OPTIONS | SETTINGS | COMPRESSSION | CREATE DEFAULT GENERAL | (ok now that we're there, here's what U do next) But 1st -> realize that everything U set on the default profile will occur everytime U rar files. So if U only need a password occasionally, or other special settings, then create another profile for those purposes. U can change which profile U need to use when WinRar is open. The Default profile is used otherwise, such as when using WinRar from the context menus in explorer. General tab: Archive format RAR Compression method BEST size (enter in BYTES the size you want as the max single Rar file). I use 51,200,000 (50,000 KB x 1024). But chose yer max size as U wish. Update method ADD AND REPLACE FILES Archiving options: check > PUT RECOVERY RECORD Archiving options: check > TEST ARCHIVED FILES. Archiving options: check > DELETE FILES AFTER ARCHIVING ( unless U want yer HDD to fill ...
    2 comments
    Read more